Alloy 20 Round Bars

ASTM B473 Alloy 20 Bright Bar, Alloy DIN 2.4660 Hexagon Bars, Alloy 20 Cold Finished Bars Suppliers in India. Alloy UNS N08020 Round Bars, AISI Alloy 20 Flat Bars Exporter, 20 Alloy Square Bars, Rods Leading Manufacturers.

A.B. Stainless Steel is one of the largest exporter, manufacturer and supplier of Alloy 20 Round Bars in India. Alloy 20 Bars is made from a nickel-iron-chromium alloy by means of having an addition of molybdenum and copper. UNS N08020Round Bars contains niobium for stabilization against sensitization resulting in intergranular corrosion. It has first-rate resistance to general corrosion, pitting, and crevice corrosion in chemicals, containing chlorides and sulfuric, phosphoric, nitric acids.

It is well suited to the production of gasoline, solvents, explosives, inorganic and organic chemicals, pharmaceuticals, food, and synthetic materials. Typical applications of the same include heat exchangers, tanks, piping, pumps, and valves. Our WNR 2.4660Round Bars are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.

Alloy 20 Round Bars Specification

Specification : ASTM B473 / ASME SB473

Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI

Size : 4 mm To 350 mm DIA

Length : 100 mm To 3000 mm Long & Abov

Diameter : 20 - 320mm

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Grade : Alloy 20 (UNS No. N08020)

Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline

Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

Our Alloy 20 Round Bars conforms to NACE MR0175/ISO 15156

ASTM B473 Alloy 20 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	BS	OR	EN
Alloy 20	2.4660	N08020	-	Z2NCUD31-20AZ	-	-	-	NiCr20CuMo

Alloy 20 Round, Bright, Hex, Threaded Bar Chemical Composition

Grade	Ni	Fe	Cr	Cu	Mo	Nb	C	Mn	P	S	Si
Alloy 20	32 – 38	Bal	19 – 21	3 – 4	2 – 3	0.1 – 0.3	0.02 max	1 – 2	0.02 max	0.005 max	0.7 max

Alloy 20 Round Bars Mechanical & Physical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.1 g/cm3	1443 °C (2430 °F)	Psi – 80000 , MPa – 551	Psi – 35000 , MPa – 241	30 %

Types Of Available Products EN, DIN, JIS, ASTM, BS, ASME, AISI Alloy 20 Round Bars

Cold Rolled Alloy 20 Rods