10MM TO 500MM DIA ANY LENGTH AS PER AVAILABILITY

www.bptuae.comInjection mold construction is the process of creating molds that are used to perform injection molding operations using an injection molding machine. These are generally used to produce plastic parts using a core and a cavity.Molds are designed as two-plate or three-plate molds, depending on the type of component to be manufactured. The two plate mold requires a single day in light, while the three plate mold requires two days. Mold construction depends on the shape of the component, which determines the parting line selection, runner and gate selection and component ejection system selection. The mold base size depends on component size and number of cavities to be planned per mold.

Product Details:Material GradeSSShapeRoundSingle Piece Length6 meterThickness/Diameter5 inchColorSilverCountry of OriginMade in India

Looking for 6061 T6 Aluminum Sheet suppliers in India? Stockist of brushed 3003 h14 flat aluminium plate and diamond tread aluminium sheet in MumbaiAlliance nickel alloys, is aluminium plate supplier it is available in wide range as per national and international standards, specifcations and quality. And the grades which it is available are 1100, 2024, 2124, 3003, 5052, 5083, 5086, 6013, 6061, 7050, & 7475.   Aluminium plate has a density lower than those of other common metals, at approximately one third that of steel. It has a great affinity towards oxygen which it forms a protective layer of oxide on the surface. It is soft, non-magnetic and ductile.aluminium sheet is an excellent conductor of heat and electricity. Its thermal conductivity is about half that of copper and its electrical conductivity is about its two-third. It crystallizes in the face-centred cubic structure. anodizedaluminum sheet is an electrochemical process that converts its surface into a durable, corrosion-resistant, decorative, anodic oxide finish and it is ideally suited for it.CFRP is been called as blackaluminum sheet and its design and fabrication has been described as a black art. It is simply a combination of carbon fiber filaments in a matrix material.powder coated aluminum sheet went through a technique which is mainly used to apply decorative and protective finishes to aluminium profiles through a process that electrostatically charges the powder consisting of a mixture of finely milled resin and pigment, by spraying it on to the aluminium extrusion, and then fusing it into a smooth coating in a curing oven.Aluminium chequered plate is also as aluminium checker plate and aluminium tread plate. It is a metal stock with a regular pattern of lines or raised diamonds on one side, with the reverse side being without features. Aluminium Patterned Sheet is manufactured by cold rolling various patterns. Its finishes provide a large selection of random and symmetrical designs that are modern and attractive in appearance. It eliminates defects like oil canning which can be reduced by using the patterned finishes to provide improved optical flatness thus making the product ideal for cladding system.Perforated Aluminium Sheet has been manually or mechanically stamped or punched using CNC technology or in some cases laser cutting to create different holes sizes, shapes and patterns. It has been utilized across a variety of industries including architectural, food and beverages, chemical, automotive, construction etc.     EN573 Aluminium Mesh Sheet can be used as screen or gauze. It sizes range from 0.75 mm to 1 mm to 2 mm diameter with strict tolerances and alpha values for uses such as gas detection and thermometry tolerances.

FGV- UNIVERSAL FLANGE ADAPTOR

HOT ROLLED TUBES AND PIPES (ALL SIZES)HOT ROLLED SHEETS GALVANIZED COILS AND SHEETSPPGI COILS AND SHEETSSANDWICH PANELS 

Stainless Steel Plate Flange Manufacturer In India As Per ANSI/ ASME B16.5See Dimensions Of Raised Face Plate Flange In Pn16 And A105 Carbon Steel Plate FlangeLook Price Per KG Of API 6A Plate Flange In India And Look Plate Flange Awwa C207 Class D Weigh Chart, Copper Plate Flange Supplier In MumbaiPlain flange also referred to as Plate  Flange Jis 16k , is also known by various other names such as flat flange, plate slip on flange or a ring flange.A Plate  Flange Jis 5k is very easy to recognize due to their slim and compact shape. A Plate  Flange Asme B16.5 Class 300 looks like a flat circular disk, with an inner bore. This inner bore of the Plate  Flange Din En 1092-1 has bolt holes on it.

KIND ATTENTION:  PROJECT MANAGER / PURCHASE MANAGER   Dear Sir, Subject: Introduction of our company as a manufacturer & supplier of Industrial valves & pipe fittings AAIMA brand GROOVED FITTINGS FOR EASY PIPE JOINTS FOR PLANT   Please  give us a valuable inquiry to us In up coming project for new requriment ,this reference we are sending you a introduction of our company and catalogs also.please send us the your requriment.  AAIMA engineering company is a manufacturer of high quality industrial valves and pipe fittings, also manufacturing std as per orders design all type valves to suit most are requirement,  for all most critical requirement.we can make it any size of valves in any metal. AAIMA brand industrial valves  valves & fittings the list of our products are as given blow.  ALL SIZE INDUSTRIAL VALVES & PIPE FITTINGS IN ANY METAL –             DUPLEX SPECIALIST FITTINGS-FLANGES 1.    Gate, Globe, Check & Ball valves. SPECIAL IN DUPLEX MATERIAL 2.    Butterfly valves. CI/ DI, WCB. 3.    Strainers (‘Y’ Type, ‘T’ Type, & ‘POT’ Type ) 4.    Steam Traps. ( Td-3, Float Type, Bucket Type ) 5.    Air Valves ( Single & Double ) 6.    Diaphragm & Pinch Valves 7.    Plug Valves / Pulp Valves & PENUMATIC / ELE AUTO VALVES 8.    VICTAULICK GROOVED COUPLING for easy pipe joint for plant ½” to 12”   Our Ready Stock Items Are: Ø  Gate Valves & Globe Valve (½” To 10”), Non Return Check Valves (½” To 10”), Ball Valves (½” To 6”) Ø  Butterfly Valves (1½” To 12”), Pulp Valves (½” To 10”)  Give us the opportunity to work with your company.we give you good quality=good services=good prices its AAIMA We are an ISO 9001-2015 /MSME / NSIC /CE  Certificated Company Committed to Product Innovation by Engineering Excellence & Precision Manufacturing OF VALVES & FITTINGS Thanking you For: - AAIMA engineering company.     s.kumar  ( Er) cell:-+91-9825186988 20,shayona estate,dudheshwar road,nr:-vadilal ice cream factory,ahmedabad-380004.india Telefax + 91-79-25632507 / 98251 86988 / 9898 00 2507 Email:-aaimavalves@yahoo.in ,  www.aaimavalves.com      

Hastelloy U Channels, Hastelloy Equal Angles, Hastelloy Unequal Angles, Hastelloy C Channels Stockist, Hastelloy Brush Polished Flat, Hastelloy Channels, Hastelloy C276 Angles, Hastelloy C22 Angles & ChannelsNeonox Overseas is the most preferred manufacturer, supplier, and exporter of a comprehensive range of Hastelloy Angles, Hastelloy Channels, and Hastelloy Flats. We supply these Hastelloy Angles, Channels, and Flats in various forms, types, dimensions, and specifications. These Hastelloy products are manufactured as per industrial quality standards.Hastelloy Angles are famous as they offer excellent corrosion resistance over a wide range of corrosive environments. These Angles are offered in various types including Hastelloy Equal Angles, and Hastelloy Unequal Angles, etc. Our high qualities Hastelloy Channels have higher molybdenum content that improve the localized corrosion resistance such as pitting and crevice corrosion.

Material GradeAlloy 20SizeAll SizeUsage/ApplicationHydraulic PipeBrandVersatile OverseasMaterialPipe FittingsCountry of OriginMade in India

F5 CHROMIUM MOLYBDENUM STEEL FLANGES MANUFACTURER, ALLOY STEEL F5 FLANGE, ALLOY STEEL 1.7362 FLANGE, ANSI B16.5 ALLOY STEEL F5 FLANGES, F5 CHROME MOLY STEEL, UNS K41545 FLANGES, CR-MO F5 FLANGES DISTRIBUTORS, AISI F5 FLAT FACE FLANGE, ALLOY STEEL F5 FLANGES EXPORTERS, F5 ALLOY STEEL RAISED FACE FLANGE, ALLOY STEEL F5 FLANGES SUPPLIER IN MUMBAI, INDIA.F5 CHROME MOLY STEEL SPECTACLE BLIND FLANGE, CRMO FLANGE F5, ASME SA182 F5 SOCKET WELD FLANGE, INOX 1.7362 FLANGE, ALLOY STEEL F5 BLIND FLANGE, ASTM A182 F5 FLANGE, CR-MO F5 FLANGE, GRADE F5 ALLOY STEEL SLIP ON FLANGE, CHROME MOLY F5 WELD NECK FLANGES DISTRIBUTORS, CHROMIUM MOLYBDENUM F5 RING TYPE JOINT FLANGE, CR-MO F5 THREADED FLANGE, CRMO F5 FORGED FLANGES SUPPLIER IN MUMBAI, INDIA.Is an approved and promising industry that is dealing with a large scale of domestic as well as international clients. We as a leading manufacturer, supplier and exporter are offering the superior quality of ASTM A182 F5 Flanges across the globe. We offer these flanges in various shape, size, dimensions, thickness, length and so on. All our excellent qualities of ASTM A182 F5 Flanges have got higher demands in all over the market due to many good features. Moreover, we offer these Flanges in customized and non-customized specifications according to the demand of our buyers at affordable rates. Our manufactured ASTM A182 F5 Flanges exhibits numerous features such as Good dimensional accuracy, Smoothness in surface finishes, Heat resistive, Perfect dimensional accuracy, Rust free, Long-lastingness, Anti-corrosiveness, General corrosion resistance, Crevice corrosion-stress corrosion cracking resistance and many more.We, are manufacturing excellent quality of ASTM A182 F5 Flanges at our highly equipped production unit by using the premium quality of raw material. The alloy we are using for the product development is 100% pure, and due to this, it adds greater strength to the quality of the flanges. Our engineers make use of refined technology and modern tools in an effective manner for making out the extraordinary quality of flanges. Our whole manufacturing process of these ASTM A182 F5 Flanges is done under the proper supervision of our professional experts that are guiding our workers at all level of the production process to develop the commendable quality of ASTM A182 F5 Flanges. We always focus on maintaining all the national and international standard while fabrication of the top-notch quality of flanges.We, are also considering the quality of the product that we are supplying to our trustworthy buyers we are conducting various tests of flanges to check its quality. Such tests are destructive and non-destructive tests. We are performing strict testing that helps us to offer the commendable quality of flanges that are expected by our clients. And then with the proper packaging material, we are performing smooth and convenient delivery to our customers on time along with the proper documentation.

ASTM B403 Nickel Alloy Flanges Specification Dimensions : ANSI/ASME B16.5, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Standards : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.Specifications : ASTM B403 / ASME SB403Grade : SMO 254 UNS No.S31254Size : 1/2″NB TO 60″NBSchedule : 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160, and XXSClass : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS

For all types of flanges, Lupin Steels Inc is your number one source. Our pipe flanges come in a wide selection of dimensions and alloys.If you require any type of flanges, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our pipe flanges or any of our other products.Product Range:The following table represents size range, product standards and material grades of Flanges.Materials GradesStainless Steel ASTM / ASME SA 182 F 304 , 304L , 304H, 309H, 310H , 316 , 316H , 316L , 316 LN , 317 , 317L , 321 , 321H , 347H .Carbon & Alloy Steel ASTM / ASME A105. ASTM / ASME A 350 LF 2 .Alloy Steel : ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.Duplex Steel ASTM / ASME SA 182 F 44 , F 45 , F51 , F 53 , F 55 , F 60 , F 61.Nickel & Copper Alloy ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) ,UNS 10276 ( HASTELLOY C 276) ASTM / ASME SB 160 UNS 2201 (NICKEL 201 ) ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 ) Copper Alloy :ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200Hastelloy Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000Inconel Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750Incoloy Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DSMonel Monel 400, Monel k500Titanium Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23Tantalum Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23

Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.Protection sheets are designed to provide reusable temporary floor protection for many fixtures and surfaces during construction.The sheets offer excellent protection for surfaces like concrete, tile, vinyl and wooden floors. Floor protection sheets sheets are easy to apply and cost-effective.road signs,display rack and point of sale displays.Packaging Making boxes, totes, trays, bins, and other containers.For Construction Reusable flooring/counter-top protection or storm panels.Trunk protection for trees. Floor protection sheets.Temporary floor protection.Corrugated sheetsThickness between 1.5 and 10 mm. floor protection.Corrugated sheetsThickness between 1.5 and 10 mm.

Thermocouple: E, J, K, N, T, B, S,R, WOther Input: Analog Voltage, Analog Current, Resistance Input, Other Sensor InputMounting: Thermohead / Thermowell Mounting DIN Rail Mounting, Board / Cabinet Mounting, OtherOutput: Analog Current (e.g., 4-20 mA), Analog Voltage, Relay / Switch Output, OtherLocal Interface: Analog Front Panel, Digital Front Panel, Computer InterfaceInterface Options: Serial Interface, Parallel Interface, Other Computer InterfaceIntrinsically Safe: Required, Must Not HaveDigital or Analog Display: Required, Must Not HaveWaterproof / Sealed: Required, Must Not HaveSensor Connection :Terminal Block, Lead Wires, Screw Clamps or Lugs, Plug / Quick-Connect, Other

Product Details:BrandPrayas MetalShapeRoundUsage/ApplicationConstructionMaterialTitaniumGradeStandardSizeCustomColorStandardOur relevant experience and profound expertise enable us in catering to variegated individual requirements of our esteemed clients. These are high in demand among our clients.

Band-IT clamps, Band-IT clamps UAE, Band-IT clamps Dubai, Band-IT clamps suppliers, Band-IT clamps suppliers UAE, Band-IT clamps suppliers Dubai. Contact us for all your Band-It inquiries. We are the authorized distributor of Band-IT UAE/Qatar/Oman/ SaudiContact@fasarabia.com / 042343 772

Product Details:ShapeRoundSize1/2" up to 300"Material StandardASTM A182Surface FinishPolishedApplicationFitting industryMaterialStainless SteelReckoned as one of the emergent companies of the industry, we are extremely immersed in providing SMO 254 Flanges.Chemical Composition:C: 0.020% MaxSi: 0.80% MaxMn: 1.00% MaxP: 0.030% MaxS: 0.010% MaxCr: 19.50% to 20.50%Ni: 17.50% to 18.50%Mo: 6.00% to 6.50%N: 0.018% to 0.220%Cu: 0.50% to 1.00%Fe: Remainder

All types of Dia

We fabricate all types of metal panels/screens which can be used in a wide variety of applications such as facades, feature walls,balcony and stair railings,dividing and privacy screens,shading,canopy panels and more...!!

MILLTECH fze. UAE. Complete aluminium industry lubricants available.OMAN-KUWAIT-SAUDI ARABIA-QATAR-BAHRAINwebsite : www.milltech.co    Email. milltech@mail.com

Tecnova has built its reputation as being a preferred partner with the leading vendors and established its name as a value added agents and stockists of HVAC products, Engineering, construction & Industrial products supply and services with a professional team of engineers in various other fields such as Oil & Gas, Water Treatment Plants, Piping, Marine safety & Lifting products.With many years of demonstrated experience, contacts and association especially in the field of engineering materials sourcing and supply we could assist the companies, project procurement departments and individuals to meet their requirement objectives by giving the best possible timely service with our quality products.Tecnova has spread its roots all over Dubai, Sharjah & Abu Dhabi Industrial Zone to cater almost all Industries where our Products & services are required. Tecnova is undertaking calibration & instrumentation for field instruments

Titanium Gr2 Welded Pipe & Tubes, Ti UNS R50400 Round Pipes Stockist, ASTM B338 Titanium Gr2 Seamless Tube Supplier, Titanium Gr2 Pipe Exporter, ASTM B338 Titanium Alloy Seamless Tubes, Ti Alloy Grade 2 Pipes and Tubes, Titanium Alloy Grade 2 Welded Pipes & Tubes Manufacturer in India.We at are manufacturer, exporter and supplier of a qualitative range of ASTM B338 Gr2 Titanium Pipes and Tubes in Mumbai, India, that are being designed as per the national and international standard quality standards. For superior quality of tubing products, Titanium Gr2 Welded Pipes and Tubes is often an enhanced substance to use, rather than competing materials like super alloys or stainless steels. Also, the tensile strength of Titanium Gr2 ERW Pipes and Tubes is better than that of austenitic or ferritic stainless steels. However, because of its unique density, strength and corrosion resistance, our Titanium Gr2 Seamless Pipes and Tubes has found its applications in many industries. body,div,table,thead,tbody,tfoot,tr,th,td,p { font-family:"Arial"; font-size:x-small } a.comment-indicator:hover + comment { background:#ffd; position:absolute; display:block; border:1px solid black; padding:0.5em; } a.comment-indicator { background:red; display:inline-block; border:1px solid black; width:0.5em; height:0.5em; } comment { display:none; }

www.bptuae.com we can make the  mold as per the customer requirements.

 flooring tiles would be deformed due to thermal expansion and various reasons. Movement joints are needed to absorb energy  that can be between structure and the tile because of  differing amounts of expansion. The movement joints and control joint profiles of  Aluminum series offer functional and long-life solutions for all  movement joints in tile and ceramic coverings.  movement joints  are installed when tile covering. we offers wide range  of movement joint profiles in stainless steel, aluminum and PVC  are available. A1P series suitable for application with marble, ceramics, terrazzo ,  stone and other similar materials.DP01-6 :The middle part of profiles is TPV and the edges are made of aluminum. The minimum application in the interior 4.80 mt x 4.80 mt and the maximum application area  6.00 mt x 6.00 mt. However, if the areas will exposed to moisture or sunlight the minimum of application must be   3.60 mt x 3.60 mt  , maximum application must be  4.80 mt x 4.80 mt.

Dear Sir,           We would like to introduce ourselves as a one of the leading Supplier & Stockiest of all kind Filler Wires, Welding Electrodes , Flux Core Wire , Cladding Strip  in Nickel Base Alloy, Titanium Alloys, Aluminium, Stainless Steel, Alloy Steel etc.   We have Brands like,UTP, BOHLER, Special metals USA, Arcos Alloys USA ,Tigweld Arc Germany, Selectarc France ,Oxford Alloy USA, Kobe Japan, Haynes Intl etc.   All Items Are Ready Stock in Mumbai & Dubai office

Nissan Steel a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010.We Our one of the leading Manufacture, Importer & Supplier of Seamless & Welded (ERW) Pipe & tube in different shape and size with different specification as per customers requiment. Our complete range is stringently test by our well-equipped testing unit to ensure their compliance with international quality norms.  Product Specification: Nickel Alloy 200 Tube  Specification: ASTM / ASME  Size: 1/2" To 48"NB & OD (Welded Thk: 1MM To 40MM)  Seamless Thk : Sch10, Sch 20, Sch 30, Sch 40, Sch 60, Sch 80  Type: Seamless, Welded (ERW), MAT, Polish, BA. MIRROR FINISH  Form: Pipe, Tube, Square, rectangle  Grade: Grade:  High Nickel Alloy  Nickel Alloy: Nickel 200, Nickel 201

We offer high grade Steel Plates at affordable price. These plates are manufactured using finest grade raw material available to ensure international quality. These steel plates are available in different shape size and thickness according to the needs of our customer. Owing to highly experienced group of qualified professional and use of latest technology machinery, these steel plates are corrosion resistance, having high tensile strength and longer durability.Features:Corrosion resistanceHigh tensile strengthDurabilitySpecification: Thickness: 4-400 mmWidth: 1000-4200 mmLength: 6000-12000 mmCertification: ISO AND BV

Concrete Bucket supplier in UAE, Concrete Bucket supplier in Abu Dhabi, Concrete Bucket supplier in Sharjah, Concrete Bucket supplier in Dubai, Concrete Bucket supplier in Ajman, Concrete Bucket supplier in Al Ain, Concrete Bucket supplier in Fujairah, and Concrete Bucket supplier in Ras Al Khaimah. All sizes of Concrete Buckets available.

Century steel corporation is stocking Stainless Steel Dairy Elbow,SS Elbow Fittings, Stainless Steel Dairy 90° Elbow, Stainless Steel 304 Dairy Elbow at low cost due to sensible man hours in India The specification for stainless steel dairy elbow are outside diameter 1/4” N.B. – 8” N.B, 1/4” O.D. – 8” O.D.Also available in different sizes..

Stainless steel 439Type 439 is a ferritic stainless steel that is best suited for use in oxidizing environments, where excellent corrosion resistance is needed. 439 Is often used in place of Type 409 where higher thermal conductivity is required. When application temperatures are too high for type 409 , type 439 provides good oxidation and corrosion resistance for many automotive exhaust system components and residential furnance primary heat exchangers Type 439 also has superior formability capabilities and is heavily used in the automotive industry. Stainless steel grade 439 is capable of being made into complex shapes such as tubular manifolds and exhaust system components, where temperatures tend to go beyond the oxidation limit of grade 409 steel. 439 is also preferred where wet corrosion resistance especially to chlorides is needed Stainless steel grade 439 has good weldability, brightness, and pitting corrosion resistance. It polishes well, and is good for deep drawing Stainless steel grade 439 is applied in areas that require oxidation and corrosion resistance. It is also widely used in catering equipment.Stainless steel 439 flat rolled stainless steel is magnetic in all conditions. Stainless steel 439 has outstanding forming abilities even for difficult and unusual shapes.Stainless steel 439 Good general corrosion resistance, especially in fresh waters and mildly oxidizing environment Stainless steel 439 replace Stainless steel 304 in oxidizing environment condition Application:Hot water tanksresidential furnancesAutomotive exhaust-system componentsAutomotive tubular manifoldsAutomotive mufflersHeat Exchanger tubing for Power generation

Stainless Rice Bin 304 grade, we are making as per customer required size

Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DSFlanges Grade : ASTM A 182 F 304/L; 316/L; 317/L; 309; 310; 321; 347; 904L.Type : SORF, BLRF, WNRF, SOLJClass : 150 To 3000Flanges Range : DN15 Upto DN1800 IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / TABLE 2.5, TABLE 6, TABLE 10, TABLE 16, TABLE 25, TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400Types : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring JointFeatures:• Durability• Corrosion resistance• Dimensional accuracy• High strength• Excellent finish 

Stainless steel 15 – 5 PH martensitic precipitation hardening type stainless steel which is designed to be corrosion resistant and hardened through heat treatment. Stainless steel 15 – 5 PH is a modification of 17-4 PH developed in the 1960s. it is also known as XM-12 or UNS S15500.UNS S15500 also has good fabrication properties, low temperature hardening and excellent corrosion resistance, which makes it suitable for many industries. 15-5ph stainless steel is annealing at 1038°C (1900°F) for 1 h. SS 15-5PH is heat treated at 1038°C (1900°F) for 1/2 h, and then air cooled. Grade 15-5 PH stainless steel used in variety of application including Paper mill equipment, Aircraft components, Marine gas turbine compressor sections, Nuclear reactor components, Hallow shafts, Engine parts, Gears, Fittings and fasteners etcSIDDHGIRI TUBES  is one the Great MANUFACTURERS AND SUPPLIERS OF 15-5 PH ROUND BARS  in Mumbai, India, UK, Dubai, Melbourne, Sydney, Abu Dhabi, Sarjah, Jebel Ali, Fujairah, Doha, Muscat, Bangkok, Istanbul, Amman, Jerusalem, Tehran, Jeddah, Riyadh, Dammam, Kuala Lumpur, Malacca, Seoul, Cairo, Alexandria, Tokyo, Shanghai, Jakarata, Shanghai, Cape Town, Europe USA UAE, Hamburg, Moscow, Johannesburg, Argentina Australia Bahrain Belgium Brazil Brunei Bulgaria Canada Africa Chile China Colombia Denmark Egypt Europe France Georgia Germany Greece Hong Kong Indonesia Iran Ireland Israel Italy Japan New Jersey Jordan Kuwait Lithuania Luxembourg Malaysia Mauritius Mexico Myanmar Netherlands New Zealand Korea Norway Oman Philippines Poland Portugal Qatar Romania Russia Saudi Arabia Singapore South Africa Georgia Korea Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Ukraine United States Venezuela Vietnam Yemen  

As per Your Requirements

Stainless Steel : ASTM A182 F304 / 304L / 304H / 316 / 316L / 317/ 317L / 321 / 310 / 347 / 904 etc.Carbon Steel : ASTM A105 / A694 / F42 / 46 / 52 / 56 / 60 / 65 / 70 / A350 LF3 / A350 LF2, etc.Alloy Steel : ASTM 182 F1/ F5/F9/F11/F22/F91 etc.Types : Weld neck, Slip-on ( SORF), Blind, Socket Weld, Lap joint, Spectacles, Ring joint, Orifice, Long Weld neck Deck Flange, etc.Size : 1/4” NB TO 24” NBClass : 150#, 300#, 600# 900#, 1500# and 2500#.

The Macstroc roll groover, powered by 1100W induction motor, hydraulic pump and convenient depth adjusting function, which is capable of grooving 2”-12” Sch 10 and 2”-8” Sch 40 standard wall pipes.Grooving Machine #Macstroc .Steed.12D2-dubaiRoll Grooving Machine,#Macstroc, Steed.12D2-sharjahRoll Groover Machine,Macstroc, Steed.12D2-abudubai

Bonding through binding .GI binding wire for superior strength

PUSH IN CONNECTOR

Aluminum Bars, Aluminum Rods, Aluminum Filler Wire Manufacturer, Exporter & Suppliers in India.Aluminum 6061, 6063, 6082, 6101 Round Bars, Aluminum Hexagon Bars, Forged Round Bars, Wire Bobbin Suppliers.https://www.amardeepsteel.com/aluminum-products.html

Reciprocating Air Compressors, Valve Assemblies & Internals, Thermoplastics, Piston, Piston Rods, Piston Rings & Rider Rings, Bearings & Bushes, Gaskets & O-rings, Machined & Turned Parts.

Advanced Guardrail ScaffoldIntroducing new advanced Guardrail from Ascend. Guardrail is place before user ascends platform. It eliminates the number of components require for assembly of the tower from 10% to 30% depends on the height of the tower. Total fall protection for the operator through out assembly and dismantling of the mobile access tower.

Item 1Diameter ofpipe： 5mm/6mm/8mm/10mm/12mm/14mm/16mmChrome plated steel backplaneForged steel framePacked by sliding crad

Lamination of extended PTFE membranes on needle felts improves the filtration efficiency and the overall dust removal from outlet gases, for high efficiency membranes more than 99.95% of particles, with diameter from 3 microns on are captured.

TYPES : ROUND, SQUARE, RECTANGULAR SIZE : UPTO 24'' NB (SEAMLESS & WELDED WALL THICKNESS : SCHEDULE 5S TO SCHEDULE XXS

ICARO benders are designed to be highly productive and enduring over time. In order to make them extremely versatile, our machines were conceived in different versions: they can be fitted with a high or low working bench, with two or four saddles, either long or short. Final users will therefore be able to operate them freely and with a great level of ease, according to their needs. The powerful gearbox, made of robust laminate and immersed in a special oil bath, doesn’t require any kind of maintenance.All inside components are built in special, heat-treated steel; additionally, helical gears allow for the workload to be evenly distributed among them, so as to make them virtually undestroyable. All reduction and other gears are assigned a serial number so as to guarantee traceability.Icaro benders are equipped with a self-braking motor and the electrical wiring components all come from the most renowned suppliers. BAR BENDING AND CUTTING MACHINE

We stock a wide range of steel sheet and plate in specifications suitable for most of the current programmes of aerospace manufacturers throughout the world. Both national and aircraftmanufacturer's proprietary specifications are stocked in a wide range of types and sizes. To accommodate special requirements, we have .

All-steel screw clamps It has a reserve of power, with the patented OMEGA bend

flange gasket in UAE

Contact: Mr. Dhaneesh HaridasanEmail: dhaneesh@ontides.comMobile: +971 56 1720220

Spacious and easy accessibleEasy portabilityAttractive look

Specifications :Standard: ASTM B152, B187, B133, B301, B196, B441, B465, JISH3250- 2006, GB/ T4423-2007 etcMaterial: C10100, C11000, C12000, C1220Length: 2m, 3m, 5.8m, 6mDiameter: 8mm, 9.5 mm, 12.7 mm, 16.0 mmSurface: Mill, Polished, Bright, Hair Line, Brush, Sand Blast, etc

HOSE CLAMP JUBILEE CLIP , A Jubilee Clip is a circular metal band or strip combined with a worm gear fixed to one end. It is designed to hold a soft, pliable hose onto a rigid circular pipe, or sometimes a solid spigot, of smaller diameter.Jubilee Clips are generally made of stainless steel or galvanised or electro-plated steel. Rotating the screw has the effect of changing the diameter of the circle formed by the band. Jubilee Clips are available in a range of sizes (diameters). Larger-diameter Jubilee Clips tend to have wider bands.

Nickel C-276) Strip, Coil, Foil, Wire, ASTM B582Description  Hastelloy C-276 is a most versatile nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good fabricability. Alloy C-276 has resisted the formation of grain boundary precipitates in the weld-heat affected zone, making it a candidate for most chemical and petrochemical processing applications in the as-welded condition. C-276 is readily fabricated by welding using methods similar to those utilized for nickel-based alloys.  Chemical compositionNickel: Balance  Chromium: 14.50-16.50  Molybdenum: 15.00-17.00  Iron: 4.00 -7.00  Tungsten: 3.00 -4.50  Cobalt: 2.50 max  Manganese: 1.00 max Applications  Bellows, 

AL DUHA 0568181007  is the leading company in the supply and installation of diverse Aluminium products such as :  Aluminium Doors and Windows Aluminium Termal Break Doors and Windows Glass Partition in Dubai Sharjah AjmanStructural Glazing and Curtain Wall SystemCustomized Tempered Glass TopsAluminium Kitchen CabinetsCast Aluminium Gates and DoorsAluminium Handrails and FencingAluminium PergolasAluminium Composite Panel CladdingMezzanine Floor ConstructionStructural Steel Fabrication WorksArchitectural Metal WorksArchitectural Glass Processing and FabricationAluminium Louver Doors, windows and fixed panels for Pumb rooms,Generator Rooms and Electrical Rooms Etc.We do the supply and installations for the above mentioned products for commercial & residential ,public areasMORE DETAILS OR ENQURIES  alduhatents@gmail.comMOB : 0568181007 / 05057723027

STAINLESS STEEL FLEXIBLE HOSE ASSY WITH STAINLESS STEEL FIXED FLANGE WELDED AT BOTH ENDAVAILABILITY : AS PER REQUIREMENT

We offer a wide variety of Forged Steel Flanges that are used in various industries. Moreover, these are made from high grade stainless steel that ensures its optimum quality. Further, these flanges are used to connect two pipes mechanically and are accurately drilled for easy assembly. Available in various specifications, these Forged Steel Flanges can also be custom made as per the clients specific requirements.

EXCEL Industry -A leading manufacturer of Tubes and Pipes in the United Arab Emirates

OUR SERVICESThe main objective of this investment was to present control in all the major projects, of different levels, local and international, with highly professional approach in the production of all glass and metal products, targeting the upper market of the construction business, in Towers, Hotels, Commercial & Business Centers, in addition to the Luxury Residential Buildings; aiming to manufacture with the highest efficiency and best quality, to satisfy and enhance the market positioning, as well as to answer to and exceed all the possible client's requirementsCURTAIN WALLMETAL CLADDINGDOORS & WINDOWSSPIDER SYSTEMSCANOPIESRAILING & BALUSTRADESSKYLIGHTSSTEEL STRUCTUREFRAMELESS GLASS SYSTEMSAUTOMATIC DOORSREVOLVING DOORSSTAINLESS STEEL WORKSPERGOLASLOUVERSKITCHEN CABINETS

We offer best rates for DUCAB wire & cables. 

Our entity is providing Ti6Al4V Wires in varied specifications. Our offered product is enormously well-liked owing to their top features. Features:Longer lifeDimensional accuracyDurable natureNominal costsEasy to use

For More details-contactUAE- Mr. Sunil Edamana +971 50 100 4589 E.mail: sunil@reyamirental.comLand line +971 4 2452400E.mail: salesuae@reyamirental.comMr. Jouhar +971 56 161 6539QATAR-Mr. Jayachandran. KEmail: jayank@reyamirental.comMob: +974 55342287Ms. Sreedevi RajanLandline +974 44167898 Email: salesqatar@reyamirental.com OMAN- Mr. Jobi +968 99217686 Email: jobikb@reyamirental.comLandline   +968 24445411 Email: salesoman@reyamirental.com SAUDI ARABIA-  Mr .Dinesh ChandraMob:+966 594791270Email: dineshc@reyamirental.comLandline: +966 138813800 Email: salesksa@reyamirental.com

We manufacture Steel Storage Tanks in UAE for Industries. With confidence to our quality, we provide a unique product and a strong warranty support to ensure the quality of our product.Samurai dedication and diligence in business is unrivaled. Samurai leads the industry with innovative design, superior craftsmanship, excellent customer service, and on time delivery.Manufacturing high quality steel storage tank products is what we do best. We built our business on a simple pledge to treat our customers and our employees fairly, and we value this proven philosophy.Samurai Tanks are available and can be delivered to all over UAE, and neighboring countries.Our sales representatives are experienced and knowledgeable individuals who can assist you with all aspects of your storage requirements.We fabricated our tanks from prime steel at our workshop with Trained Welders and Individuals who are empowered by the vast amount of knowledge and experience. Our  competent support personnel are eager to help you with solutions to your storage tank needs. We are the only tank manufacturer whose skilled maintenance expert will visit your site, to troubleshoot any problems that may arise.Our fully-equipped field service technicians are capable of performing.  * Confined space entry  WeldingPaintingFabricationRepairsModificationsInspection       

Custom Made Steel Flanges  

12 METER OUTDOOR FLAGS INSTALLATION 

We are the Leading supplier of ASTM A182 F5 Flanges.

U.V resistantHeat and light reflectiveMoisture and solvent resistantCan be use both indoor as well as outdoor for long term applicationGood for harshHigh thermal conductivity to maximize efficiency of heating or coolingSeal and protect sensitive surfaces from dust and moistureThermally conductiveFlame resistant

3T Steel barFor ConstructionSize: 12mmx12mEX-Jebel Ali

Aluminium Chequer plate Size 1.05x1000x2000mm.

Flux cored and metal cored wires combine the benefits of a vast metallurgical choice with the very high productivity of a semi or fully automated continuous welding process.  In view of their technological and economic advantages, flux cored and metal cored wires represent an ever greater share of the welding market.WA continuously satisfies and responds to the demanding expectations for quality, flexibility, performance and versatility in the cored wire market.

Request For Our Latest Prices On High Quality IS:1239 ERW Steel Pipes! Exports Is Our Specialty!!As one of the leading suppliers of IS:1239 steel pipes in Mumbai, Steelmet Industries (Steel Pipes & Tube Division) stocks an extensive range of electric resistance welded (ERW) IS:1239 steel pipes in a size range of 15mm. N.B. to 150mm N.B. in the Light, Medium and Heavy classes. Steelmet also offers steel pipes in compliance with IS: 3589-2001 and IS: 10577-1982.All IS:1239 steel pipes and black tubes supplied by Steelmet are produced in accordance with ASTM /IS/BS specifications. At Steelmet, we strictly adhere the scheme of Testing and Inspecting laid down by the Bureau of Indian Standards (BIS).Steel Pipes And Tubes Dimensions Confirming To IS: 1239 (Part – I) – 2004, Equivalent To BS – 1387 / 1985Nominal BoreOutside DiameterLight (A-Class) Thickness WeightMedium (B-Class) Thickness WeightHeavy (C-Class) Thickness WeightInchmmInchmmmmkg/mtrmmkg/mtrmmkg/mtr1/8″3 mm0.40610.321.800.3612.002.650.4931/4″6 mm0.53213.491.800.5172.350.4072.900.7693/8″10 mm0.87217.101.800.6742.350.8522.901.021/2″15 mm0.84421.432.000.9522.651.1223.251.453/4″20 mm1.09427.202.351.4102.651.5803.251.901″25 mm1.31233.802.652.0103.252.4404.052.971.1/4″32 mm1.65642.902.652.5803.253.1404.053.841.1/2″40 mm1.90648.402.903.2503.253.6104.054.432″50 mm2.37560.302.904.1103.655.1004.476.172.1/2″65 mm3.00476.203.255.8403.656.6104.477.903″80 mm3.50088.903.256.8104.058.4704.8510.14″100 mm4.500114.303.659.8904.5012.105.4014.45″125 mm5.500139.70––4.8516.205.4017.86″150 mm6.500165.10––4.8519.205.4021.2Big Diameter Steel Pipes, ERW Pipes Confirming To IS 3589, Grade FE330, Grade FE410Wall ThicknessNominalBore 7″ NB 193.7 mm ODNominalBore 8″ NB 219.1 mm ODNominalBore 10″ NB 273 mm ODNominalBore 12″ NB 323.7 mm ODNominalBore 14″ NB 355.6 mm ODNominalBore 16″ NB 406.4 mm ODNominalBore 18″ NB 457mm ODNominalBore 20″ NB 508 mm ODmmKg/mtrKg/mtrKg/mtrKg/mtrKg/mtrKg/mtrKg/mtrKg/mtr4.8522.5925.6232.0738.13––––5.2024.1727.4334.3440.85––––5.6026.0029.2836.9343.9348.11––6.0027.8831.5339.5047.0251.4961.0069.00–6.3529.3433.2841.7349.6754.4362.3570.5078.507.0132.7736.7646.4355.4561.8269.04––7.94–41.0050.9561.8567.9877.9487.80–8.18–42.5653.4265.12––––9.53–51.5060.2473.7581.2193.13105.00117.0012.70––––107.28123.30139.00155.00Steel Pipes, Steel Tubes Tolerance As Per IS:1239(a) Thickness(1)Butt welded Light tubes+Not limited– 8 percentMedium and Heavy tubes+ Not Limited – 10 percent(2)Seamless Tubes+Not Limited– 12.5 percent(b) Weight :(1)Single tube (light series)+10 percent – 8 percent(2)Single tube (medium & heavy Series)+10 percentIS:1239 Steel Pipes And Tubes Product, Stock RangeSize: 15mm NB to 150mm NB (1/2” to 6”), 7″ (193.7mm OD to 20″ 508mm OD)Dimension & Tolerance: Black Steel Pipes Dimensions – IS: 1239 (Pt I) – 2004, Equivalent to BS – 1387 / 1985Specifications: IS – 1239 (Part -1) 2004, Equivalent to BS – 1387 / 1985Surface Finish: BlackFeatures: High Strength, Corrosion Resistant, High Toughness and DeformabilityLength: As per customer’s requirement (Maximum upto 7 meters)Features: High Strength, Corrosion Resistant, High Toughness and DeformabilityWhat are the Applications of IS:1239 Steel Pipes and IS:1239 Steel Tubes?✔ Industrial Water Lines, Plant Piping✔ Agriculture and Irrigation✔ Galvanized Steel Fencings✔ Road Barriers✔ Parking Barriers✔ Temporary Fencings✔ Steel Gates & Windows✔ Road Side Railings✔ Structural and fabrication work✔ Water Pipelines✔ Sewerage Systems✔ Oil Pipe Lines✔ Oil Refinery Piping, Crude Oil Piping

AL Ruwais Engineering Company L.L.C, , An Organisation built on trust and commitment to excellence. We are engaged in providing professional and technical expertise to wide range of industrial sectors.The backbone of our business comprises of Welders-3G/ 4G/ 6G/ TIG/ MIG, Structural/Steel/Pipe Fabricators, Industrial Electricians, Mechanics, Duct Men, Spray Painters, Scaffolders, Carpenters, Plumbers, Mason, Steel Fixers, Riggers, Network cabling and fiber optics cabling Technicians and Technical Helpers. We offer to undertake all types of steel fabrication works - structural and pipe line.

Gold BarPurity 96.8%Karate 22 plus

Our range of butt weld fitting is widely used by the industries which stand for its quality & zero defect. Butt weld fittings can be made of stainless steel, carbon steel, alloy steel etc. We provide quality product by using premium quality raw material. Size available for butt weld fittings are ¼" NB to 4" NB. Products are available in different shape, size & dimensions as per our client's requirement. Types of Butt weld fittings are Elbow, Tee, Union, Cross, Coupling, Cap, Bushing , Plug, Swage Nipple, Welding Boss, Hexagon Nipple, Barrel Nipple, Welding Nipple, Street Elbow, Hexagon Nut, Hose Nipple, Bend, Adapter, Insert, etc. Our main mission is to satisfy our customers with quality product produced by our expert team.Size : 15 NB UP TO 1200 NB INCarbon Steel : ASTM / ASME A 234 WPB , WPC, ASTM / ASME A 860 WPHY 42 , WPHY 46 , WPHY 52 , WPH 60 , WPHY 65 & WPHY 70.Alloy Steel : ASTM / ASME A 234 WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91

For More Details Contact:-Krunal PatelM           + 971509222146E           krunal@sabinplastic.com

Om tubes is the one of the best manufacturer and supplier of Copper Nickel Flanges in India. We export supreme quality flanges of variety alloys and metals at attractive pricing to more than 30 countries. Our product finish is of highest quality in the market and our delivery service is praised by all our clients. We produce Copper Nickel flanges of all grades and dimensions, and even offer tailor made flanges on demand.All our raw materials are bought by 100% authorized sellers and each piece is endorsed by credited quality control laboratories of government of India and International certifications. Our sales service is loved by all our customers as it makes the buying experience at Om tubes an exquisite one. We receive orders from all around the world for a variety of products and Om tubes never fails to deliver on time because it is customary for us to store abundant products at a ready dispatch position. Here at Om tubes, we are accustomed to providing world class service with world class products for over a decade.

Our lead bricks can be used for walls, caves, glove-boxes, hot cells or partitions, the transportation of radioactive materials, and nuclear shielding or simply as ballast weight. ... They are commonly usedfor shielding when sheet lead is impractical or not available in sizes or thicknesses you may require.

We ALLIED METAL & TUBES offer a comprehensive range of Titanium Rods for our clients spread across the globe. Known for resistant to general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, our range of titanium round bars are widely used by our clients spread across the globe.Specifications:Grades: Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23Type:GB / T 2965-1996ASTM B-348, ASTM F 136

Turbo Heat ExchangersPackless turbo heat exchangers are specifically intended for application on refrigeration systems to transfer heat between liquid refrigerant leaving the condenser on the high pressure side of the system and refrigerant vapor leaving the evaporator on the low pressure side of the system.This heat transfer may be desirable for several reasons:To raise the vapor temperature to prevent frosting or condensation on the suction line.To evaporate any remaining liquid in the vapor stream to prevent possible compressor damage.To subcool the liquid to prevent flash gas in the liquid line.To increase system refrigerating capacityPackless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration system to dampen the transmission of compressor-induced vibration through system piping.Packless vibration absorbers are constructed of deep pitch corrugated tubing in stainless steel for increased flexibility and vibration absorption, covered with high tensile stainless steel wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping.Each absorber is pressure tested then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed.Packless Vibration Absorbers are compatible with all HFC, HCFC and CFC refrigerants. The stainless steel models, VAFS-3 through VAFS-11, are electrically welded with no braze joints to achieve the higher working pressures set by today’s industry standards.Packless vibration absorbers are recognized under the component programs of Underwriter’s Laboratories, Inc., c-UL-US, File #SA2575.Packless model VAF vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping.Packless VAF's are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. Tubing and braid are reinforced by ferrules at each end, and connected to female copper tube ends by high temperature braze alloys. The units are designed for making sweat connections to refrigerant piping. Eleven models are available to fit copper tubing sizes from 1/4 inch through 1-5/8 inches O.D.Each VAF is pressure tested then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. VAF's are available either in bulk or individually boxed.Packless VAF's are recognized under the component programs of Underwriter's Laboratories, Inc., (C-UL-US) for application on both suction and discharge lines.

ARO Pneumatic Cylinders are available in Composite, Round Line Repairable and Disposable, and NFPA Square Interchangeable. Silverair, Economair, and Provenair are popular lines.Many series are interchangeable with competitive models5 Year WarrantyRepairable units are easy to service, providing long life durability.Complete range offering

Product Details:Material Standard ASTM 182, F44, F51, F53, F55,F60 BLRF FlangesINDUSTRIAL FLANGES....SORF, BLRF, WNRF, SPECTACLE FLANGEASTM 182, F44, F51, F53, F55,F60 BLRF FlangesBy keeping track with market development, we are offering an extensive array of  Flanges.  These orifice flanges are processed by consuming high quality metal, these orifice flanges are widely acclaimed for their attributes.  To fulfill the speckled requirements of clients, we offer these orifice flanges in diverse dimensions at very reasonable rates.  Offered orifice flanges are also inspected after manufacturing process by our quality experts.Features:Light weightEffectivenessDurability

Typical applications include tubing for the aerospace industry and heat-exchangers. tubing is available in size range outside diameter 9.53–38.1 mm (3/8–1½ in.) with wall thicknesses from 0.7 to 5 mm (0.0275 to 0.1968 in.). The titanium tubes tubes are delivered in straight lengths or as U-bent tubes.Grades and standardsMechanical propertiesSizes and tolerancesTitanium tube grades (other grades are available on request)Sandvik gradeUNSASTM/ASMEW.Nr.AFNORTi Grade 1 (CP Ti)R50250Grade 1W.Nr. 3.7025T-35Ti Grade 2 (CP Ti)R50400Grade 2W.Nr. 3.7035T-40Ti Grade 3 (CP Ti)R50550Grade 3W.Nr. 3.7055T-50Ti Grade 7R52400Grade 7W.Nr. 3.7235-Ti Grade 9R56320Grade 9W.Nr. 3.7195T-A3V2.5Ti Grade 11R52250Grade 11W.Nr. 3.7225-Ti Grade 12R53400Grade 12W.Nr. 3.7105-Ti Grade 16R52402Grade 16--Ti Grade 17R52252Grade 17--Ti Grade 26R52404Grade 26--Ti Grade 28R52254Grade 28--Sandvik gradeDescriptionTi Grade 1 (CP Ti)Relatively low-strength and high-ductility pure titanium (Cp).Ti Grade 2 (CP Ti)Medium-strength pure titanium (Cp).Ti Grade 3 (CP Ti)High strength pure titanium (Cp).Ti Grade 7Medium-strength Pd-alloyed titanium for enhanced corrosion properties.Ti Grade 9High-strength titanium alloyed with 3% Al and 2.5% V.Ti Grade 11Low-strength titanium plus 0.12-0.25% Pd for enhanced corrosion properties.Ti Grade 12High-strength titanium alloy plus 0.3% Mo and 0.8% Ni for enhanced corrosion properties.Ti Grade 16Medium-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties.Ti Grade 17Low-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties.Ti Grade 26Medium-strength titanium plus 0.08-0.14% Ru for enhanced corrosion properties.Ti Grade 28High-strength titanium alloy plus 3% Al, 2.5% V and 0.08%-0.14% Ru for enhanced corrosion properties.Type of productGrade(s)Technical requirements*according toTitanium tubes and pipesTi and Ti alloy grades 1, 2, 3, 7, 9, 11, 12, 16, 17, 26 and 28ASTM B337, ASTM B338, ASME SB338NACE MRO 175-94VdTÜV 230/2Dimensional tolerances acc. to DIN 17861 D3/T3 or closer

Kalpataru Piping Solutions are engaged in manaufacturing and supplying Stainless Steel Lapped Flanges that are widely used in steel plants, sugar mills & distilleries, pumps and petrochemicals, cement and construction industries.In order to append and respond to the diverse requirements of esteemed clients, we are able to offer Lap Joint Flanges. The offered range of lap joint flanges is made utilizing high grade raw material and innovative technology in strict compliance with the international quality norms and standards. Along with this, the offered range of lap joint flanges is checked on different characteristics to maintain its authenticity throughout the designing process.Applications : Steel plants, Refineries, Chemical IndustriesSTAINLESS STEEL & DUPELX STEEL LAPPED FLANGES:Size : 1/2" to 48" NB, ANSI B 16.5Standard : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300Stainless Steel : ASTM A 240 /182 F - 304/304H/304L/316/316H/316L/316Ti/309/310/317L/321/347/904LDuplex steel : ASTM A 182 - F51, F53, F55ALLOY STEEL, CARBON STEEL LAPPED FLANGES :Size : 1/2" to 48" NB, ANSI B 16.5Schedule : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300Alloy Steel : ASTM A 182 - F5, F9, F11, F12, F22 & F91Carbon steel : ASTM A 105, ASTM A694, F42, F46, F52, F60, F65, F70Low Temp. : A 350 LF2, A 516 GR.70COPPER & NICKEL ALLOYS LAPPED FLANGES :Size : 1/2" to 6" NB, ANSI B 16.5Standard : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300Copper Nickel : C70600(90:10), C71500(70:30), C71640Nickel : UNS NO2200, NO2201Monel : UNS N04400, N05500, Alloy 20Inconel : UNS N06600, N06601, N06625, NO8800, N08810, NO8825Hastelloy : UNS N10276, N06022, N10665, N06455Titanium : Gr.1,2,3 DTH 3.7025, DTH 3.7035, DTH 3.7055FEATURES :1. High Corrosion Resistance2. Superior Tensile Strength

We have ready stock for Stainless Steel Pipes and Tubes in Seamless and Welded form ranging from 10 MM OD to 20" NB sizes. We request you to please send us any of your details requirement for Pipes and Tubes, Hollow section. All material will be with MTC as per ASTM 312/213 

Features:Designed to withstand fire impact as per the stringent UL test standards and SP Sweden standardsSpecial Tongue & groove construction to prevent hot gases & smoke from seeping inBurglary/Theft protection provided with two locksOption for two key lock or one numerical combination lock & one key or one electronic combination lockOne lockable drawer & one adjustable shelf (Fr safe 1060 has two adjustable shelves) to maximize interior storage spaceThe model FR-445 & above are provided with the castorsSafes are Powder Coated in Textured / Hammer Tone FinishColour options availableFlexibility of Horizontal / Vertical models in FR Safes 20 ltr. and 30 ltrPerformance Standards:Tested for Fire Endurance, Fire & Impact & Explosion Hazard Test BY Underwriter’s laboratory , USA (UL-72- Class 350-1 Hour)FR Safe 20 Litres to Fr 40 Litres have successfully been tested & listed by SP laboratories, Sweden for 90 minutes of Fire Endurance as per NT-017, 90P standards

STEEL FABRICATION SUPPLIERS IN UAE

Product Description:Aluminium, Aluminium Bronze, Aluminium Silicon Bronze, Manganeese Bronze, Phospherous Bronze, Gunmetal.FORMS:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes.

We supply a wide range of Mild Steel Angles, which are available in various sizes and metal grades. These are manufactured by us using quality steel. We have been offering a wide range of stainless steel angles in various forms, such as stainless steel flat bar, grade: 200, 300, series, SS hot rolled flat bar and SS cold drawn flat bar to our clients. These find applications in architectural applications, construction industries, multi-storied building, fastening industry, overhead cranes, fabrication and bridges. Grade :  SS 410, SS 409, SS 202/201, SS 304 / SSS 304L /SS 304H, SS 316 / SS 316L , 309S ,309H ,310S, 310HSize of Angles :• 20 mm x 20 mm x 3 mm Thk.• 25 mm x 25 mm x 3 mm Thk.• 25 mm x 25 mm x 5 mm Thk.• 30 mm x 30 mm x 3 mm Thk.• 100 mm x 100 mm x 12 mm Thk.Features :• Durability• Easy to install• Rust free• Abrasion free

Product Description:With years of experience in manufacturing industrial products we are offering a wide variety of ISO Cargo Tank. The quality of each item is at par with the set industrial norms and we oversee the entire production process to ensure quality assured products to our customers. All the latest technology is incorporated in the manufacturing process and these are offered in various sizes and dimensions.Features:    Durable    Light weight    CheapAdditional Information:    Item Code: CT-002

A leading manufacturer, exporter, suppliers & stock holder of ASTM A335/ASME SA335 P5 Boiler Steel Pipe & we provide a comprehensive range of ASTM A335/ASME SA335 P5 Boiler Steel Pipe.We manufacture ASTM A335/ASME SA335 P5 Boiler Steel Pipe & ASTM A335 P1/P2/P5/P5b/P5c/P9/P11/P12/P22/P23/P91/P92 tubing in India for export all around the world.We can offer a comprehensive range of ASTM A335/ASME SA335 P5 Boiler Steel Pipe for the right technical solution.Sambhav Pipes & Fittings manufacture & export wide selections of ASTM A335/ASME SA335 P5 Boiler Steel Pipe, Alloy Steel Pipes ASTM A335/ASME SA335 P1, P2, P5, P5b, P5c, P9, P11 & ASTM A106 Grade B Carbon Steel Seamless Pipes at most attractive price as per customer requirements, we can also manufacture ASTM A335/ASME SA335 P5 Boiler Steel Pipe in ASTM/ASME/ANSI grades as per our customer budget, we enjoy the reputation supplying ASTM A335/ASME SA335 P5 Boiler Steel Pipe at cheapest in steel industries around the globe.